Show Ip Bgp Traffic - NETGEAR M6100 Series Reference Manual

Term
Name
AF
Configuration
Command example:
(NETGEAR Switch) #show ip bgp template
Template Name AF
------------- ----
peer-grp1
IPv4
peer-grp2 IPv4
IPv4
IPv6
IPv6
peer-grp3 IPv6
peer-grp4
IPv4

show ip bgp traffic

This command reports global BGP message counters for transmitted and received
messages along with BGP work queue information.
Format
show ip bgp traffic
Mode Privileged Exec
The first table lists the number of BGP messages of each type that this router has sent and
received. Following the table is a maximum send and receive UPDATE message rate. These
rates report the busiest one-second interval.
The queue statistics table reports information for BGP work queues. Items placed on each of
these work queues are as follows:
M6100 Series Switches
Definition
The name of a BGP peer template
The address family to which the configuration command applies. This field is blank for
session parameters, which apply to all address families.
Configuration commands that are included in the template.
Configuration
-----------------------------
timers 5 15
password rivendell
advertisement-interval 15
prefix-list strider in
maximum-prefix 100
prefix-list gandolf in
maximum-prefix 200
send-community
update-source loopback 0
next-hop-self
Border Gateway Protocol Commands
867