Show Fip-Snooping Statistics - NETGEAR M6100 Series Reference Manual

show fip-snooping statistics

Use the show fip-snooping statistics command in User EXEC or Privileged EXEC
mode to display the statistics of the FIP packets snooped in the VLAN or on an interface. If
the optional (VLAN or interface) argument is not given, this command displays the statistics
for all of the FIP snooping enabled VLANs.
Note: This command can only be entered after FIP snooping is enabled
using the feature fip-snooping command. Otherwise, it does
not appear in the CLI syntax tree.
Format
show fip-snooping statistics [vlan vlan-id] | [interface interface-id]
Mode User EXEC
Privileged EXEC
Parameter Description
vlan-id A VLAN on which FIP snooping is enabled.
interface-id An interface belonging to a VLAN on which FIP snooping is enabled.
The following table describes the packet counters per FIP Operation.
Packet Counter Description
VR Number of VLAN Request messages received on the VLAN.
VN Number of VLAN Notification messages received on the VLAN.
MDS Number of Multicast Discovery Solicitation messages snooped on the VLAN.
UDS Number of Unicast Discovery Solicitation messages snooped on the VLAN.
FLOGI Number of Fabric Logins snooped on the VLAN.
FDISC Number of fabric discovery logins snooped on the VLAN.
LOGO Number of Fabric Logouts on the VLAN.
VNPort-keep-alive Number of VN_Port keepalive messages snooped on the VLAN.
MDA Number of Multicast Discovery Advertisement messages snooped on the VLAN.
UDA Number of Unicast Discovery Advertisement messages snooped on the VLAN.
FLOGI_ACC Number of Fabric Logins accepted on the VLAN.
FLOGI_RJT Number of Fabric Logins rejected on the VLAN.
FDISC_ACC Number of Fabric Discoveries accepted on the VLAN.
FDISC_RJT Number of Fabric Discoveries rejected on the VLAN.
M6100 Series Switches
Data Center Commands
610