Show Igmpsnooping Mrouter Interface - NETGEAR M6100 Series Reference Manual

When you specify a value for vlan-id, the following information displays.
Term Definition
VLAN ID The VLAN ID.
IGMP Snooping Indicates whether IGMP Snooping is active on the VLAN.
Admin Mode
Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group Membership The amount of time in seconds that a switch will wait for a report from a particular group on a
Interval (secs) particular interface, which is participating in the VLAN, before deleting the interface from the
entry.This value may be configured.
Maximum The amount of time the switch waits after it sends a query on an interface, participating in the VLAN,
Response Time because it did not receive a report for a particular group on that interface. This value may be
(secs) configured.
Multicast Router The amount of time to wait before removing an interface that is participating in the VLAN from the list
Expiry Time (secs) of interfaces with multicast routers attached. The interface is removed if a query is not received. This
value may be configured.
Report Indicates whether IGMP reports (set by the command
Suppression Mode enabled or not.
Command example:
(NETGEAR switch) #show igmpsnooping 1
VLAN ID........................................ 1
IGMP Snooping Admin Mode....................... Disabled
Fast Leave Mode................................ Disabled
Group Membership Interval (secs)............... 260
Max Response Time (secs)....................... 10
Multicast Router Expiry Time (secs)............ 0
Report Suppression Mode........................ Enabled

show igmpsnooping mrouter interface

This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface unit/slot/port
Mode Privileged EXEC
Term Definition
Interface The port on which multicast router information is being displayed.
Multicast Router Indicates whether multicast router is statically enabled on the interface.
Attached
VLAN ID The list of VLANs of which the interface is a member.
M6100 Series Switches
Switching Commands
519
set igmp report-suppression on page 517) in