NETGEAR M6100 Series Reference Manual page 1168

Table 51. 802.1Q Log Messages (continued)
Component Message
802.1Q VLAN Delete Call failed in driver for vlan %d
802.1Q Problem deleting data for VLAN %d
802.1Q Dynamic entry %d can only be modified after it is
converted to static
802.1Q Cannot find vlan %d to convert it to static
802.1Q Only Dynamically created VLANs can be converted
802.1Q Cannot modify tagging of interface %s to non
existence vlan %d"
802.1Q Error in updating data for VLAN %d in VLAN
database
802.1Q DTL call to create VLAN %d failed with rc %d
802.1Q Not valid permission to delete the VLAN %d
802.1Q Attempt to set access vlan with an invalid vlan id %d Invalid VLAN ID.
802.1Q Attempt to set access vlan with (%d) that does not
exist
802.1Q VLAN create currently underway for VLAN ID %d
802.1Q VLAN ID %d is already exists as static VLAN
802.1Q Cannot put a message on dot1q msg Queue,
Returns:%d
802.1Q Invalid dot1q Interface: %s
802.1Q Cannot set membership for user interface %s on
management vlan %d
802.1Q Incorrect tagmode for vlan tagging. tagmode: %d
Interface: %s
802.1Q Cannot set tagging for interface %d on non existent
VLAN %d"
802.1Q Cannot set tagging for interface %d which is not a
member of VLAN %d
802.1Q VLAN create currently underway for VLAN ID %d"
802.1Q VLAN ID %d already exists
M6100 Series Switches
NETGEAR Managed Switch Software Log Messages
1168
Cause
Failed to delete VLAN ID from the hardware.
Failed to delete VLAN ID from the VLAN
database.
Failed to modify the VLAN group filter
Failed to convert Dynamic VLAN to static VLAN.
VLAN ID not exists.
Error while trying to convert the static created
VLAN ID to static.
Error for a given interface sets the tagging
property for all the VLANs in the vlan mask.
Failed to add VLAN entry into VLAN database.
Failed to add VLAN entry in hardware.
Failed to delete static VLAN ID. Invalid requestor.
VLAN ID not exists.
Creating a VLAN which is already under process
of creation.
Trying to create already existing static VLAN ID.
Failed to send Dot1q message on Dot1q
message Queue.
Failed to add VLAN to a member of port.
Failed to add VLAN to a member of port.
Incorrect tagmode for VLAN tagging.
The VLAN ID does not exist.
Failure in Setting the tagging configuration for a
interface on a range of VLAN.
Trying to create the VLAN ID which is already
under process of creation.
Trying to create the VLAN ID which is already
exists.