Permit Ip Host Mac Host; Show Ip Arp Inspection - NETGEAR M6100 Series Reference Manual

permit ip host mac host

Use this command to configure a rule for a valid IP address and MAC address combination
used in ARP packet validation.
Format
permit ip host sender-ipaddress mac host sender-mac
Mode ARP Access-list Config
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format
no permit ip host sender-ipaddress mac host sender-mac
Mode ARP Access-list Config

show ip arp inspection

Use this command to display the Dynamic ARP Inspection global configuration and
configuration on all the VLANs. With the vlan keyword and vlan-list argument (that is,
comma separated VLAN ranges), the command displays the global configuration and
configuration on all the VLANs in the given VLAN list. For the vlan-list argument, you
can enter a list of VLANs (for example, 12-18 or 12,14) to display the statistics on all
DAI-enabled VLANs in the list, or enter a single VLAN to display the statistics for only that
VLAN. The global configuration includes the source mac validation, destination mac
validation and invalid IP validation information.
Format
show ip arp inspection [vlan vlan-list]
Mode Privileged EXEC
User EXEC
Term Definition
Source MAC Displays whether Source MAC Validation of ARP frame is enabled or disabled.
Validation
Destination MAC Displays whether Destination MAC Validation is enabled or disabled.
Validation
IP Address Displays whether IP Address Validation is enabled or disabled.
Validation
VLAN The VLAN ID for each displayed row.
Configuration Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid Displays whether logging of invalid ARP packets is enabled on the VLAN.
M6100 Series Switches
Switching Commands
502