Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Mode
Interface
Direction
Operational
Status
Policy Name
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets
13.6.7 show service-policy
This command displays a summary of policy-oriented statistics information for all
interfaces in the specified direction.
Format
Mode
The following information is repeated for each interface and direction (only those
interfaces configured with an attached policy are shown):
Interface
Operational
Status
Policy Name
13.7 MAC Access Control List (ACL) Commands
This section describes the commands you use to configure MAC ACL settings. MAC
ACLs ensure that only authorized users have access to specific resources and block any
unwarranted attempts to reach network resources.
The following rules apply to MAC ACLs:
Quality of Service (QoS) Commands
Privileged EXEC
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
The name of this class instance.
A count of the packets discarded for this class instance for
any reason due to DiffServ treatment of the traffic class.
show service-policy in
Privileged EXEC
Valid slot and port number separated by forward slashes.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface.
v1.0, November 2007
13-31