Command example:
The following example also shows that a receiver is configured as a non-time-out entry:
(NETGEAR Switch) #show sflow receivers 1
Receiver Index................................. 1
Owner String................................... tulasi
Time out....................................... No Timeout
is added
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Format
show sflow samplers
Mode
Privileged EXEC
Field
Sampler Data Source
Receiver Index
Packet Sampling Rate
Max Header Size
show sflow source-interface
Use this command to display the sFlow source interface configured on the switch.
Format
show sflow source-interface
Mode
Privileged EXEC
Field
sFlow Client Source Interface The interface ID of the physical or logical interface configured as the sFlow client source
sFlow Client Source IPv4
Address
M6100 Series Switches
Description
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
ports only.
The sFlowReceiver configured for this sFlow sampler.
The statistical sampling rate for packet sampling from this source.
The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.
Description
interface.
The IP address of the interface configured as the sFlow client source interface.
Utility Commands
285
<= No Timeout string