Usb Commands; Show Usb Device - NETGEAR M6100 Series Reference Manual

USB commands

If a USB flash device is installed in the USB slot, the USB commands display the device
status and content.

show usb device

This command displays USB flash device details.
Format
show USB device
Mode Privileged EXEC
Term Description
Device Status This field specifies the current status of device. Following are possible device status states:
•
•
•
Manufacturer Manufacturer details.
Serial Number Serial number of the device.
USB Version Version of the USB device.
Compliance
Class Code Device Class
Subclass Code Device SubClass
Protocol Device Protocol
Vendor ID Vendor specifies details of device-Vendor ID
Product ID Vendor specifies details of device-Product ID
Command example:
(NETGEAR Switch) #show USB device
Device Status......................................................... Active
Manufacturer............................................................ xxxx
Serial Number......................................................... yyyyy
USB Version Compliance.............................. 2.0
Class Code.................................................................. abc
Subclass Code......................................................... acb
Protocol........................................................................ 0x0
Vendor ID..................................................................... zzzzz
Product ID.................................................................. aaaaa
M6100 Series Switches
Active. Device is plugged in and the device is recognized if device is not mounted.
Inactive. Device is not mounted.
Invalid. Device is not present or invalid device is plugged in.
Utility Commands
277