Neighbor Filter-List (Ipv6 Address Family Config) - NETGEAR M6100 Series Reference Manual

Parameter Description
ip-address The neighbor's IPv4 address.
as-path-list-number Identifies an AS path list.
in The AS Path list is applied to advertisements received from the neighbor.
out The AS Path list is applied to advertisements to be sent to the neighbor.
no neighbor filter-list (BGP Router Config)
Use this command to unconfigure neighbor filter lists.
Format
no neighbor ip-address filter-list as-path-list-number {in | out}
Mode BGP Router Config

neighbor filter-list (IPv6 Address Family Config)

This command filters BGP to apply an AS path access list to UPDATE messages received
from or sent to a specific neighbor. Filtering for IPv6 is independent of filtering configured for
IPv4. If an UPDATE message includes both IPv4 and IPv6 NLRI, it could be filtered for IPv4
but accepted for IPv6 or vice versa.
If you assign a neighbor filter list to a nonexistent AS path access list, all routes are filtered.
Default No neighbor filter lists are configured by default.
Format
neighbor ip-address filter-list as-path-list-number {in | out}
Mode IPv6 Address Family Config
Parameter Description
ip-address The neighbor's IPv6 address.
as-path-list-number Identifies an AS path list.
in The AS Path list is applied to advertisements received from the neighbor.
out The AS Path list is applied to advertisements to be sent to the neighbor.
no neighbor filter-list (IPv6 Address Family Config)
Use this command to unconfigure neighbor IPv6 filter lists.
Format
no neighbor ip-address filter-list as-path-list-number {in | out}
Mode IPv6 Address Family Config
M6100 Series Switches
Border Gateway Protocol Commands
824