NETGEAR M6100 Series Reference Manual page 776

no redirect-url mode
This command disables the redirect mode for a captive portal configuration.
Format
no redirect-url mode
Mode Captive Portal Instance
redirect-url
Use this command to specify the URL to which the newly authenticated client is redirected if
the URL Redirect Mode is enabled. This command is only available if the redirect mode is
enabled.
Format
redirect-url url
Mode Captive Portal Instance
max-bandwidth-up
This command configures the maximum rate at which a client can send data into the network.
Default 0
Format
max-bandwidth-up rate
Mode Captive Portal Config
Parameter Description
rate Rate in bps. 0 indicates limit not enforced.
no max-bandwidth-up
This command sets the maximum rate at which a client can send data into the network to the
default.
Format
no max-bandwidth-up
Mode Captive Portal Instance
max-bandwidth-down
This command configures the maximum rate at which a client can receive data from the
network.
Default 0
Format
max-bandwidth-down rate
Mode Captive Portal Instance
M6100 Series Switches
Captive Portal Commands
776