show bgp ipv6 summary
This command displays a summary of BGP IPv6 configuration and status. The output and
field descriptions are the same as for the command
except that Number of Network Entries, Number of AS Paths, and Pfx Rcvd all count IPv6
rather than IPv4 routing information. The command lists all adjacencies that are configured to
carry IPv6 routes.
Format
show bgp ipv6 summary
Mode
Privileged Exec
show bgp ipv6 update-group
This command reports the status of IPv6 outbound update groups and their numbers. Output
and format are the same as for
Format
show bgp ipv6 update-group [group-index | peer-address]
Mode
Privileged Exec
Parameter
Description
group-index
(Optional) If specified, this option restricts the output to a single update group.
peer-address
(Optional) If specified, this option restricts the output to the update group containing the peer with the
given address.
Routing Policy Commands
Exterior routing protocols like BGP use industry-standard routing policy to filter and modify
routing information exchanged with peers. BGP makes use of the following routing policy
constructs:
•
AS Path Access Lists
•
BGP Community Lists
•
Use the Routing Policy commands to configure routing policies such as:
•
Matching on an AS Path
•
Modifying the AS Path
•
Setting the local preference
•
Setting the route metric
•
Setting an IPv6 next hop
•
Setting or matching on a BGP community
M6100 Series Switches
show ip bgp template
Border Gateway Protocol Commands
876
show ip bgp summary
on page 866.
on page 864,