NETGEAR M6100 Series Reference Manual page 910

If you use the brief parameter, the following information displays for all configured IPv6
interfaces.
Term Definition
Interface The interface in unit/slot/port format.
IPv6 Operational Shows whether the mode is enabled or disabled.
Mode
IPv6 Shows the IPv6 address and length on interfaces with IPv6 enabled.
Address/Length
Method Indicates how each IP address was assigned. The field contains one of the following values:
• DHCP. The address is leased from a DHCP server.
• Manual. The address is manually configured.
Global addresses with no annotation are assumed to be manually configured.
If you specify an interface, the following information also displays.
Term
Routing Mode
IPv6 Enable Mode
Administrative Mode
Bandwidth
Interface Maximum Transmission
Unit
Router Duplicate Address Detection
Transmits
Address Autoconfigure Mode
Address DHCP Mode
IPv6 Hop Limit Unspecified
Router Advertisement NS Interval
Router Advertisement Lifetime
Router Advertisement Reachable
Time
Router Advertisement Interval
Router Advertisement Managed
Config Flag
Router Advertisement Other Config
Flag
M6100 Series Switches
Definition
Shows whether IPv6 routing is enabled or disabled.
Shows whether IPv6 is enabled on the interface.
Shows whether the interface administrative mode is enabled or disabled.
Shows bandwidth of the interface.
The MTU size, in bytes.
The number of consecutive duplicate address detection probes to transmit.
Shows whether the autoconfigure mode is enabled or disabled.
Shows whether the DHCPv6 client is enabled on the interface.
Indicates if the router is configured on this interface to send Router Advertisements
with unspecified (0) as the Current Hop Limit value.
The interval, in milliseconds, between router advertisements for advertised
neighbor solicitations.
Shows the router lifetime value of the interface in router advertisements.
The amount of time, in milliseconds, to consider a neighbor reachable after
neighbor discovery confirmation.
The frequency, in seconds, that router advertisements are sent.
Shows whether the managed configuration flag is set (enabled) for router
advertisements on this interface.
Shows whether the other configuration flag is set (enabled) for router
advertisements on this interface.
IPv6 Commands
910