Macfilter Addsrc; Macfilter Adddest All - NETGEAR M6100 Series Reference Manual

macfilter adddest all

This command adds all interfaces to the destination filter set for the MAC filter with the given
macaddr and VLAN of vlanid. The macaddr parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The vlanid parameter must
identify a valid VLAN.
Note: Configuring a destination port list is only valid for multicast MAC
addresses.
Format
macfilter adddest all macaddr vlanid
Mode Global Config
no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the
given macaddr and VLAN of vlanid. The macaddr parameter must be specified as a
6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The vlanid parameter must
identify a valid VLAN.
Format
no macfilter adddest all macaddr vlanid
Mode Global Config

macfilter addsrc

This command adds the interface or range of interfaces to the source filter set for the MAC
filter with the MAC filter with the given macaddr and VLAN of vlanid. The macaddr
parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The vlanid parameter must identify a valid VLAN.
Format
macfilter addsrc macaddr vlanid
Mode Interface Config
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the given
macaddr and VLAN of vlanid. The macaddr parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The vlanid parameter must
identify a valid VLAN.
Format
no macfilter addsrc macaddr vlanid
Mode Interface Config
M6100 Series Switches
Switching Commands
478