Show Auto-Voip Oui-Table - NETGEAR M6100 Series Reference Manual

Field Description
Priority The 802.1p priority. This field is valid for OUI auto VoIP.
AutoVoIP Mode The Auto VoIP mode on the interface.
Command example:
(NETGEAR Switch)# show auto-voip protocol-based interface all
VoIP VLAN Id................................... 2
Prioritization Type............................ traffic-class
Class Value.................................... 7
Interface Auto VoIP
Mode
--------- -------------- -----------------
0/1 Disabled
0/2 Disabled
0/3 Disabled
0/4 Disabled
Command example:
(NETGEAR Switch)# show auto-voip oui-based interface all
VoIP VLAN Id................................... 2
Priority....................................... 7
Interface Auto VoIP
Mode
--------- -------------- ------------------
0/1 Disabled
0/2 Disabled
0/3 Disabled
0/4 Disabled
0/5 Disabled

show auto-voip oui-table

Use this command to display the VoIP OUI table information.
Format
show auto-voip oui-table
Mode Privileged EXEC
M6100 Series Switches
Operational Status
Down
Down
Down
Down
Operational Status
Down
Down
Down
Down
Down
Quality of Service Commands
1061