Show Ip Helper Statistics - NETGEAR M6100 Series Reference Manual

The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vlan-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in a unit/slot/port format. The vlan-id can
be a number from 1–4093.
Format
show ip helper-address [unit/slot/port | vlan vlan-id]
Mode Privileged EXEC
Parameter Description
interface The relay configuration is applied to packets that arrive on this interface. This field is set to any for
global IP helper entries.
UDP Port The relay configuration is applied to packets whose destination UDP port is this port. Entries whose
UDP port is identified as any are applied to packets with the destination UDP ports listed in Table 4.
Discard If Yes, packets arriving on the given interface with the given destination UDP port are discarded
rather than relayed. Discard entries are used to override global IP helper address entries which
otherwise might apply to a packet.
Hit Count The number of times the IP helper entry has been used to relay or discard a packet.
Server Address The IPv4 address of the server to which packets are relayed.
Command example:
(NETGEAR Switch) #show ip helper-address
IP helper is enabled
Interface UDP Port
--------------- -----------
1/0/1 dhcp
1/0/17 any

show ip helper statistics

Use this command to display the number of DHCP and other UDP packets processed and
relayed by the UDP relay agent.
Format
show ip helper statistics
Mode Privileged EXEC
M6100 Series Switches
Discard Hit Count
-------- ----------
No 10
Yes 2
Routing Commands
700
Server Address
---------------
10.100.1.254
10.100.2.254