Prefix-Suppression (Router Ospfv3 Config); Router-Id (Ospf) - NETGEAR M6100 Series Reference Manual

Default Prefix suppression is disabled.
Format
prefix-suppression
Mode Router OSPF Config
no prefix-suppression
This command disables prefix-suppression. No prefixes are suppressed from getting
advertised.
Format
no prefix-suppression
Mode Router OSPF Config

prefix-suppression (Router OSPFv3 Config)

This command suppresses the advertisement of all the IPv6 prefixes except for prefixes that
are associated with secondary IPv6 addresses, loopbacks, and passive interfaces from the
OSPFv3 router advertisements.
To suppress a loopback or passive interface, use the ipv ospf prefix-suppression
command in interface configuration mode. Prefixes associated with secondary IPv6
addresses can never be suppressed.
Default Prefix suppression is disabled.
Format
prefix-suppression
Mode Router OSPFv3 Config
no prefix-suppression
This command disables prefix-suppression. No prefixes are suppressed from getting
advertised.
Format
no prefix-suppression
Mode Router OSPFv3 Config

router-id (OSPF)

This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id.
The ipaddress is a configured value.
Format
router-id ipaddress
Mode Router OSPF Config
M6100 Series Switches
Routing Commands
717