NETGEAR M6100 Series Reference Manual page 320

show stats flow-based
This command displays the configured time range, flow-based rule parameters, and the
interface list for the flow specified.
Format
show stats flow-based [rule-id | all]
Mode Privileged EXEC
Parameter Description
rule-id The unique identifier for the flow-based rule.
Command example:
(NETGEAR Switch) #show stats flow-based all
Flow based rule Id............................. 1
Time Range..................................... test
Source IP...................................... 1.1.1.1
Source MAC..................................... 1234
Source TCP Port................................ 123
Source UDP Port................................ 123
Destination IP................................. 2.2.2.2
Destination MAC................................ 1234
Destination TCP Port........................... 123
Destination UDP Port........................... 123
Interface List
--------------
1/0/1 - 1/0/2
Interface Hit Count
--------- ---------
1/0/1 100
1/0/2 0
Flow based rule Id............................. 2
Time Range..................................... test
Source IP...................................... 1.1.1.1
Source TCP Port................................ 123
Source UDP Port................................ 123
Destination IP................................. 2.2.2.2
Destination TCP Port........................... 123
Destination UDP Port........................... 123
Interface List
--------------
1/0/1 - 1/0/2
M6100 Series Switches
Utility Commands
320