show udld
This command displays the global settings of UDLD.
Format
show udld
Mode
User EXEC
Privileged EXEC
Parameter
Description
Admin Mode
The global administrative mode of UDLD.
Message Interval
The time period (in seconds) between the transmission of UDLD probe packets.
Timeout Interval
The time period (in seconds) before making a decision that the link is unidirectional.
Command example:
The following output displays after you enable UDLD and configure nondefault interval
values:
(NETGEAR Routing) #show udld
Admin Mode..................................... Enabled
Message Interval............................... 13
Timeout Interval............................... 31
show udld unit/slot/port
This command displays the UDLD settings for the specified unit/slot/port. If the all keyword is
entered, it displays information for all ports.
Format
show udld {unit/slot/port | all}
Mode
User EXEC
Privileged EXEC
Parameter
Description
Port
The identifying port of the interface.
Admin Mode
The administrative mode of UDLD configured on this interface. This is either Enabled or Disabled.
M6100 Series Switches
Switching Commands
580