Mvrp Periodic State Machine - NETGEAR M6100 Series Reference Manual

MVRP Commands
mvrp (Global Config)
Use this command in Global Configuration mode to enable MVRP. MVRP must also be
enabled on the individual interfaces.
Note: If MVRP is enabled on all devices and STP is disabled, statically
created VLANs are propagated to other devices. Each device ends up
with all the VLANs and connecting ports participating in all the VLANs.
This may cause loops in the network.
Default enabled
Format
mvrp
Mode Global Config
no mvrp (Global Config)
Use this command in Global Configuration mode to disable MVRP.
Format
no mvrp
Mode Global Config

mvrp periodic state machine

Use this command in Global Configuration mode to enable the MVRP periodic state machine.
Default disabled
Format
mvrp periodic state machine
Mode Global Config
no mvrp periodic state machine
Use this command in Global Configuration mode to disable the MVRP periodic state
machine.
Format
no mvrp periodic state machine
Mode Global Config
M6100 Series Switches
Switching Commands
440