NETGEAR M6100 Series Reference Manual page 293

Hide thumbs Also See for M6100 Series:

Table of Contents

If you do not specify a port, the command displays the information in the following table.

Cumulative Energy Saving per

Current Power Consumption per

Power Saving

Green Ethernet Features supported List of Green Features supported on the given unit which could be one or more of

Energy Detect

Energy-detect Config

Energy-detect Opr

Command example:

The following example shows that the system supports all green Ethernet features:

(NETGEAR Switch) #show green-mode

Current Power Consumption (mW).............. 11172

Power Saving (%)............................ 10

Cumulative Energy Saving /Chassis (W * H)... 10

Green Ethernet Features Supported

--------------------------------

Energy-Detect EEE LPI-History LLDP-Cap-Exchg Pwr-Usg-Est

Energy-Detect

M6100 Series Switches

Estimated cumulative energy saved in the chassis in (watts * hours) due to all green

modes enabled

Power consumption by all ports in the chassis in mWatts.

Estimated percentage power saved on all ports in the chassis due to Green mode(s)

Unit Index of the chassis member.

the following: Energy-Detect (Energy Detect), EEE (Energy Efficient Ethernet),

LPI-History (EEE Low Power Idle History), LLDP-Cap-Exchg (EEE LLDP Capability

Exchange), Pwr-Usg-Est (Power Usage Estimates).

Energy-detect Admin mode is enabled or disabled

Energy detect mode is currently active or inactive. The energy detect mode may be

administratively enabled, but the operational status may be inactive.

EEE Admin Mode is enabled or disabled.

Short-Reach-Config

Utility Commands

Chapters

Table of Contents