Port-Security Max-Static; Port-Security Mac-Address - NETGEAR M6100 Series Reference Manual

no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed
on a specific port to its default value.
Format
no port-security max-dynamic
Mode Interface Config

port-security max-static

This command sets the maximum number of statically locked MAC addresses allowed on a
port. The valid range is 0–20.
Default 1
Format
port-security max-static maxvalue
Mode Interface Config
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default
value.
Format
no port-security max-static
Mode Interface Config

port-security mac-address

This command adds a MAC address to the list of statically locked MAC addresses for an
interface or range of interfaces. The vid is the VLAN ID.
Format
port-security mac-address mac-address vid
Mode Interface Config
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
no port-security mac-address mac-address vid
Mode Interface Config
M6100 Series Switches
Switching Commands
538