Show Vpc Brief - NETGEAR M6100 Series Reference Manual

no vpc peer-link
This command unconfigures a port channel as the VPC peer link.
Format
no vpc peer-link
Mode LAG Interface
show vpc
This command displays information about an VPC. The configuration and operational modes
of the VPC are displayed; the VPC is operationally enabled if all the preconditions are met.
The port-channel that is configured as an VPC interface is also displayed with the member
ports on the current switch and peer switch (with their link status).
Format
show vpc id
Mode User EXEC
Command example:
(NETGEAR Switch) # show vpc 10
VPC id#10
-----------------
Config mode...............................................Enabled
Operational mode..............................Enabled
Port channel..............................................3/1
Self member ports Status
----------------- ---------
0/2 UP
0/6 DOWN
Peer member ports Status
----------------- ---------
0/8 UP

show vpc brief

This command displays the VPC global status and current VPC operational mode (the VPC
is in operational mode if the preconditions are met). The peerlink and keepalive statuses as
well as the number of configured and operational VPCs and the system MAC and role are
displayed.
Format
show vpc brief
Mode Privileged EXEC
M6100 Series Switches
Switching Commands
467