Show Rmon History - NETGEAR M6100 Series Reference Manual

show rmon history

This command displays the specified entry in the RMON history table.
Format
show rmon history index {errors [period seconds] | other [period seconds] |
throughput [period seconds]}
Mode Privileged Exec
Term Description
History Control Index An index that uniquely identifies an entry in the historyControl table. Each such entry defines a
set of samples at a particular interval for an interface on the device. The range is 1 to 65535.
History Control Data The source interface for which historical data is collected.
Source
History Control The requested number of discrete time intervals over which data is to be saved. The range is 1 to
Buckets Requested 65535. The default is 50.
History Control The number of discrete sampling intervals over which data shall be saved. This object is
Buckets Granted read-only. The default is 10.
History Control Interval The interval in seconds over which the data is sampled. The range is 1 to 3600. The default is
1800.
History Control Owner The owner string associated with the history control entry. The default is monitorHistoryControl.
Maximum Table Size Maximum number of entries that the history table can hold.
Time Time at which the sample is collected, displayed as period seconds.
CRC Align Number of CRC align errors.
Undersize Packets Total number of undersize packets. Packets are less than 64 octets long (excluding framing bits,
including FCS octets).
Oversize Packets Total number of oversize packets. Packets are longer than 1518 octets (excluding framing bits,
including FCS octets).
Fragments Total number of fragment packets. Packets are not an integral number of octets in length or had
a bad Frame Check Sequence (FCS), and are less than 64 octets in length (excluding framing
bits, including FCS octets).
Jabbers Total number of jabber packets. Packets are longer than 1518 octets (excluding framing bits,
including FCS octets), and are not an integral number of octets in length or had a bad Frame
Check Sequence (FCS).
Octets Total number of octets received on the interface.
Packets Total number of packets received (including error packets) on the interface.
Broadcast Total number of good Broadcast packets received on the interface.
Multicast Total number of good Multicast packets received on the interface.
M6100 Series Switches
Utility Commands
307