Network (Ipv6 Address Family Config) - NETGEAR M6100 Series Reference Manual

If a route map is configured to set attributes on the advertised routes, match as-path and
match community terms in the route map are ignored. A match ip-address prefix-list term is
honored in this context. If your route map includes such a match term, the network is only
advertised if the prefix list permits the network prefix. If there is no route map with the name
given, the network is not advertised.
Default No networks are advertised by default.
Format
network prefix mask network-mask [route-map rm-name]
Mode BGP Router Config
Parameter Description
prefix An IPv4 address prefix in dotted notation.
network-mask The network mask for the prefix in dotted quad notation (e.g., 255.255.0.0).
rm-name (Optional) A route map can be used to set path attributes on the route.
no network (BGP Router Config)
This command disables BGP from advertising an address prefix.
Format
no network prefix mask network-mask [route-map rm-name]
Mode BGP Router Config

network (IPv6 Address Family Config)

This command identifies network IPv6 prefixes that BGP originates in route advertisements
to its neighbors. The prefix is only advertised if the common routing table includes a non-BGP
route with the same prefix. The route may be a connected route, a static route, or a dynamic
route from another routing protocol.
BGP accepts up to 64 networks per address family. The network command may specify a
default route (network 0.0.0.0 mask 0.0.0.0).
If a route map is configured to set attributes on the advertised routes, match as-path and
match community terms in the route map are ignored. A match ip-address prefix-list term is
honored in this context. If your route map includes such a match term, the network is only
advertised if the prefix list permits the network prefix. If there is no route map with the name
given, the network is not advertised.
Default No networks are advertised by default.
Format
network ipv6-address/prefix-length [route-map rm-name]
Mode IPv6 Address Family Config
M6100 Series Switches
Border Gateway Protocol Commands
838