Ip Rip Send Version - NETGEAR M6100 Series Reference Manual

no ip rip receive version
This command configures the interface to allow RIP control packets of the default version(s)
to be received.
Format
no ip rip receive version
Mode Interface Config

ip rip send version

This command configures an interface or range of interfaces to allow RIP control packets of
the specified version to be sent.
The options are: rip1 to send e only RIP version 1 formatted packets; rip2 for RIP
version 2; both to send packets from either format; or none to not allow any RIP control
packets to be sent.
Default rip2
Format
ip rip send version {rip1 | rip1c | rip2 | none}
Mode Interface Config
no ip rip send version
This command configures the interface to allow RIP control packets of the default version to
be sent.
Format
no ip rip send version
Mode Interface Config
hostroutesaccept
This command enables the RIP hostroutesaccept mode.
Default enabled
Format
hostroutesaccept
Mode Router RIP Config
no hostroutesaccept
This command disables the RIP hostroutesaccept mode.
Format
no hostroutesaccept
Mode Router RIP Config
M6100 Series Switches
Routing Commands
760