Show Policy-Map Interface; Show Service-Policy - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
OperStatus
Policy Name

13.6.6 show policy-map interface

This command displays policy-oriented statistics information for the specified interface
and direction. The
system.
Note: This command is only allowed while the DiffServ administrative mode is
Format
Mode
Interface
Direction
Operational
Status
Policy Name
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets

13.6.7 show service-policy

This command displays a summary of policy-oriented statistics information for all
interfaces in the specified direction.
Format
Mode
13-28
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
<unit/slot/port>
enabled.
show policy-map interface <unit/slot/port> [in]
Privileged EXEC
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
The name of this class instance.
A count of the packets discarded for this class instance for
any reason due to DiffServ treatment of the traffic class.
show service-policy in
Privileged EXEC
v4.1, October 2008
parameter specifies a valid interface for the
Quality of Service (QoS) Commands