udld timeout interval
This command configures the time interval after which UDLD link is considered to be
unidirectional. The range is from 5 to 60 seconds.
Default
5 seconds
Format
udld timeout interval seconds
Mode
Global Config
udld reset
This command resets all interfaces that have been shutdown by UDLD.
Default
None
Format
udld reset
Mode
Privileged EXEC
udld enable (Interface Config)
This command enables UDLD on the specified interface.
Default
disable
Format
udld enable
Mode
Interface Config
no udld enable (Interface Config)
This command disables UDLD on the specified interface.
Format
no udld enable
Mode
Interface Config
udld port
This command selects the UDLD mode operating on this interface. If the aggressive
keyword is not entered, the port operates in normal mode.
Default
normal
Format
udld port [aggressive]
Mode
Interface Config
M6100 Series Switches
Switching Commands
579