Neighbor Default-Originate (Ipv6 Address Family Config) - NETGEAR M6100 Series Reference Manual

no neighbor default-originate (BGP Router Config)
Use this command to prevent BGP from originating a default route to a specific neighbor.
Format
no neighbor ip-address default-originate [route-map map-name]
Mode BGP Router Config

neighbor default-originate (IPv6 Address Family Config)

To configure BGP to originate a default IPv6 route to a specific neighbor, use the neighbor
default-originate command in IPv6 Address Family configuration mode. By default, a
neighbor-specific default has no MED and the Origin is IGP. Attributes may be set using an
optional route map. A neighbor-specific default is only advertised if the Adj-RIB-Out does not
include a default learned by other means, either from the
Router Config) command or a default learned from a peer. This type of default origination is
not conditioned on the presence of a default route in the routing table. This form of default
origination does not install a default route in the BGP routing table (it will not appear in the
show ip bgp command), nor does it install a default route in the Adj-RIB-Out for the update
group of peers so configured (it will not appear in the
advertised-routes command).
Origination of the default route is not subject to a prefix filter configured with the command
distribute-list prefix out (BGP)
A route map may be configured to set attributes on the default route sent to the neighbor. If
the route map includes a match ip-address term, that term is ignored. If the route map
includes match community or match as-path terms, the default route is not advertised. If
there is no route map with the route map name given, the default route is not advertised.
Default No default is originated by default.
Format
neighbor ip-address default-originate [route-map map-name]
Mode IPv6 Address Family Config
Parameter Description
ip-address The neighbor's IPv6 address.
map-name (Optional) A route map may be configured to set attributes on the default route advertised to the
neighbor.
M6100 Series Switches
on page 814.
Border Gateway Protocol Commands
822
default-information originate (BGP
show ip bgp neighbors