Exception Dump Filepath; Exception Core-File - NETGEAR M6100 Series Reference Manual

exception dump filepath

Use this command to configure a file-path to dump core file to a TFTP server, NFS mount or
USB device subdirectory.
Default None
Format
exception dump filepath dir
Mode Global Config
no exception dump filepath
Use this command to reset the exception dump filepath configuration to its factory default
value.
Default None
Format
exception dump filepath
Mode Global Config

exception core-file

Use this command to configure a prefix for a core-file name. The core file name is generated
with the prefix as follows:
If hostname is selected:
file-name-prefix_hostname_Time_Stamp.bin
If hostname is not selected:
file-name-prefix_MAC_Address_Time_Stamp.bin
If hostname is configured the core file name takes the host name, otherwise the core-file
names uses the MAC address when generating a core dump file. The prefix length is 15
characters.
Default Core
Format
exception core-file {file-name-prefix | [hostname] | [time-stamp]}
Mode Global Config
M6100 Series Switches
Utility Commands
266