Mac Access Control List (Acl) Commands; Show Service-Policy - NETGEAR GSM7228PS Cli Manual

Term Definition
In Discarded A count of the packets discarded for this class instance for any reason due to DiffServ
Packets
treatment of the traffic class.

show service-policy

This command displays a summary of policy-oriented statistics information for all interfaces in the
specified direction.
Format
show service-policy in
Mode Privileged EXEC
The following information is repeated for each interface and direction (only those interfaces
configured with an attached policy are shown):
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
Operational The current operational status of this DiffServ service interface.
Status
Policy Name The name of the policy attached to the interface.

MAC Access Control List (ACL) Commands

This section describes the commands you use to configure MAC ACL settings. MAC ACLs
ensure that only authorized users have access to specific resources and block any unwarranted
attempts to reach network resources.
The following rules apply to MAC ACLs:
• The maximum number of ACLs you can create is hardware dependent. The limit applies to all
ACLs, regardless of type.
• The system supports only Ethernet II frame types.
• The maximum number of rules per MAC ACL is hardware dependent.
• For the GSM7328Sv1, GSM7352Sv1, and GSM7328FS, if you configure an IP ACL on an
interface, you cannot configure a MAC ACL on the same interface.
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
8-32