Remote Monitoring Commands; Rmon Alarm - NETGEAR M6100 Series Reference Manual

4 0d:00:03:20
3 0d:00:03:51
2 0d:00:04:22
1 0d:00:04:53

Remote Monitoring Commands

Remote Monitoring (RMON) is a method of collecting a variety of data about network traffic.
RMON supports 64-bit counters (RFC 3273) and High Capacity Alarm Table (RFC 3434).
Note: There is no configuration command for ether stats and high capacity
ether stats. The data source for ether stats and high capacity ether
stats are configured during initialization.

rmon alarm

This command sets the RMON alarm entry in the RMON alarm MIB group.
Format
rmon alarm alarm-number variable sample-interval {absolute | delta}
rising-threshold value [rising-event-index] falling-threshold value
[falling-event-index] [startup {rising | falling | rising-falling}] [owner
string]
Mode Global Config
Parameter Description
Alarm Index An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample
at a particular interval for an object on the device. The range is 1 to 65535.
Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1
primitive type of integer.
Alarm Interval The interval in seconds over which the data is sampled and compared with the rising and falling
thresholds. The range is 1 to 2147483647. The default is 1.
Alarm Absolute The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed
Value value.
Alarm Rising The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default
Threshold is 1.
Alarm Rising Event The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535.
Index The default is 1.
Alarm Falling The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default
Threshold is 1.
M6100 Series Switches
3 2
3 1
3 1
3 1
Utility Commands
298