Lldp Med Confignotification; Lldp Med Transmit-Tlv - NETGEAR M6100 Series Reference Manual

lldp med
Use this command to enable MED on an interface or a range of interfaces. By enabling MED,
you will be effectively enabling the transmit and receive function of LLDP.
Default disabled
Format
lldp med
Mode Interface Config
no lldp med
Use this command to disable MED.
Format
no lldp med
Mode Interface Config

lldp med confignotification

Use this command to configure an interface or a range of interfaces to send the topology
change notification.
Default disabled
Format
lldp med confignotification
Mode Interface Config
no ldp med confignotification
Use this command to disable notifications.
Format
no lldp med confignotification
Mode Interface Config

lldp med transmit-tlv

Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED
set will be transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs) from this
interface or a range of interfaces.
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
[network-policy]
Mode Interface Config
M6100 Series Switches
Switching Commands
551