show ip bgp neighbors policy
This command displays the inbound and outbound IPv4 policies configured for a specific
peer. The output distinguishes policies that are configured on the peer itself and policies that
the peer inherits from a peer template.
Format
show ip bgp neighbors [ip-address] policy
Mode
Privileged EXEC
Parameter
Description
ip-address
Optional. Specifies an IPv4 address of a neighbor to which to limit the output.
The command output displays the following information.
Parameter
Description
Neighbor
The peer address of a neighbor.
Policy
A neighbor-specific BGP policy.
Template
If the policy is inherited from a peer template, this field lists the template name.
Command example:
(NETGEAR Switch) #show ip bgp neighbors 172.20.101.100 policy
Neighbor
Policy
--------------- ------------------------------- ------------------------
172.20.101.100
advertisement-interval 600
default-originate
filter-list 500 in
filter-list 500 out
prefix-list barney in
prefix-list wilma out
maximum-prefix unlimited 100 warning-only
route-map fred in
route-map dino out
send-community
advertisement-interval 600
default-originate
show ip bgp neighbors received-routes
This command displays the list of routes received from a specific neighbor. The list includes
both accepted and rejected routes.
M6100 Series Switches
Border Gateway Protocol Commands
861
Template
torPeers
torPeers
torPeers
torPeers
torPeers
torPeers