Redistribute (Rip) - NETGEAR M6100 Series Reference Manual

split-horizon
This command sets the RIP split horizon mode. Split horizon is a technique for avoiding
problems caused by including routes in updates sent to the router from which the route was
originally learned. The options are: none, no special processing; simple, a route is not
included in updates sent to the router from which it was learned; poison, a route is included
in updates sent to the router from which it was learned, but the metric is set to infinity.
Default simple
Format
split-horizon {none | simple | poison}
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode Router RIP Config

redistribute (RIP)

This command configures RIP protocol to redistribute routes from the specified source
protocol or routers. Five possible match options exist. When you submit the command
redistribute ospf match, the match option or options that you specify are added to
any match types presently being redistributed. Internal routes are redistributed by default.
The metric argument can have a value in the range from 0–15.
Default metric—not-configured
match—internal
Format for OSPF as
redistribute ospf [metric metric] [match [[internal] [external 1]
source protocol
[external 2] [nssa-external 1] [nssa-external 2]]
Format for other
redistribute {bgp | static | connected} [metric metric]
source protocols
Mode Router RIP Config
no redistribute
This command deconfigures RIP protocol to redistribute routes from the specified source
protocol or routers.
Format
no redistribute {ospf | bgp | static | connected} [metric] [match [[internal]
[external 1] [external 2] [nssa-external 1] [nssa-external 2]]
Mode Router RIP Config
M6100 Series Switches
Routing Commands
761