Show Time-Range - NETGEAR M6100 Series Reference Manual

periodic
Use this command to add a periodic time entry to a time range. The time parameter is based
off of the currently configured time zone.
The first occurrence of the days-of-the-week argument is the starting day(s) from which
the configuration that referenced the time range starts going into effect. The second
occurrence is the ending day or days from which the configuration that referenced the time
range is no longer in effect. If the end days-of-the-week are the same as the start, they can
be omitted
This argument can be any single day or combinations of days: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday, Sunday. Other possible values are:
• daily — Monday through Sunday
• weekdays — Monday through Friday
• weekend — Saturday and Sunday
If the ending days of the week are the same as the starting days of the week, they can be
omitted.
The first occurrence of the time argument is the starting hours:minutes which the
configuration that referenced the time range starts going into effect. The second occurrence
of the time argument is the ending hours:minutes at which the configuration that referenced
the time range is no longer in effect.
The hours:minutes are expressed in a 24-hour clock. For example, 8:00 is 8:00 am and 20:00
is 8:00 pm.
Format
periodic days-of-the-week time to time
Mode Time-Range Config
no periodic
This command deletes a periodic time entry from a time range.
Format
no periodic days-of-the-week time to time
Mode Time-Range Config

show time-range

Use this command to display a time range and all the absolute/periodic time entries that are
defined for the time range. Use the name parameter to identify a specific time range to
display. When name is not specified, all the time ranges defined in the system are displayed.
Format
show time-range [name]
Mode Privileged EXEC
M6100 Series Switches
Quality of Service Commands
1056