Show Ipv6 Verify Source; Show Ipv6 Source Binding - NETGEAR M6100 Series Reference Manual

show ipv6 verify source

Use this command to display the IPv6SG configurations on all ports. If the interface option
is specified, the output is restricted to the specified unit/slot/port argument.
Format
show ipv6 verify source [interface unit/slot/port]
Mode Privileged EXEC
User EXEC
Term Definition
Interface Interface address in unit/slot/port format.
Filter Type Is one of two values:
• ip-v6mac: User has configured MAC address filtering on this interface.
• ipv6: Only IPv6 address filtering on this interface.
IPv6 Address IPv6 address of the interface
MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port
security is disabled on the interface, then the MAC Address field displays permit-all.
VLAN The VLAN for the binding rule.
Command example:
(NETGEAR Switch) #show ipv6 verify source
Interface Filter Type
--------- -----------
0/1 ipv6-mac
0/1 ipv6-mac

show ipv6 source binding

Use this command to display the IPv6SG bindings.
Format
show ipv6 source binding [dhcp-snooping | static] [interface unit/slot/port]
[vlan-id]
Mode Privileged EXEC
User EXEC
Term Definition
MAC Address The MAC address for the entry that is added.
IP Address The IP address of the entry that is added.
Type Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.
M6100 Series Switches
IP Address MAC Address
--------------- -----------------
2000::1/64 00:02:B3:06:60:80
3000::1/64 00:0F:FE:00:13:04
IPv6 Commands
992
Vlan
-----
10
10