user group (captive portal local user commands)
This command assigns/modifies the group name for the associated captive portal user. The
user-id variable is the user ID, which is a number in the range of 1 to 128. The
group-name variable is a name up to 32 characters.
Format
user user-id group group-name
Mode
Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user 1 group 123
user session-timeout
This command sets the session timeout value for the associated captive portal user. The
user-id variable is the ID of a user configured in the local database, and is a number in the
range of 1 to 128. The timeout variable is a number that represents the session time-out in
seconds. Use 0 to indicate that the time-out is not enforced.
Default
0
Format
user user-id session-timeout timeout
Mode
Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user 1 session-timeout 86400
no user session-timeout
This command sets the session timeout value for the associated captive portal user to the
default value. The user-id variable is the ID of a user configured in the local database, and
is a number in the range of 1 to 128.
Format
no user user-id session-timeout
Mode
Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #no user 1 session-timeout
user idle-timeout
This command sets the session idle timeout value for the associated captive portal user. The
user-id variable is the ID of a user configured in the local database, and is a number in the
range of 1 to 128. The timeout variable is a number that represents the idle time-out in
seconds. Use 0 to indicate that the time-out is not enforced.
M6100 Series Switches
Captive Portal Commands
791