Ipv6 Verify Binding; Show Ipv6 Dhcp Snooping - NETGEAR M6100 Series Reference Manual

ipv6 verify binding

Use this command to configure static IPv6 source guard (IPv6SG) entries.
Format
ipv6 verify binding mac-address vlan vlan-id ipv6-address interface
interface-id
Mode Global Config
no ipv6 verify binding
Use this command to remove the IPv6SG static entry from the IPv6SG database.
Format
no ipv6 verify binding mac-address vlan vlan-id ipv6-address interface
interface-id
Mode Global Config

show ipv6 dhcp snooping

Use this command to display the DHCP Snooping global configurations and per port
configurations.
Format
show ipv6 dhcp snooping
Mode Privileged EXEC
User EXEC
Term Definition
Interface The interface for which data is displayed.
Trusted If it is enabled, DHCP snooping considers the port as trusted. The factory default is disabled.
Log Invalid Pkts If it is enabled, DHCP snooping application logs invalid packets on the specified interface.
Command example:
(NETGEAR Switch) #show ipv6 dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted
--------- --------
0/1 Yes
0/2 No
0/3 No
M6100 Series Switches
Log Invalid Pkts
----------------
No
Yes
Yes
IPv6 Commands
987