Show Ipv6 Ospf Range - NETGEAR M6100 Series Reference Manual

Term Definition
Restart Helper Indicates the status of this router as a helper during a graceful restart of the router specified in the
Status command line:
• Helping—This router is acting as a helpful neighbor to the specified router.
• Not Helping—This router is not a helpful neighbor at this time.
Restart Reason When this router is in helpful neighbor mode, this indicates the reason for the restart as provided by
the restarting router.
Remaining Grace The number of seconds remaining the in current graceful restart interval. This is displayed only when
Time this router is currently acting as a helpful neighbor for the router specified in the command.
Restart Helper Exit Indicates the reason that the specified router last exited a graceful restart.
Reason
• None—Graceful restart has not been attempted
• In Progress—Restart is in progress
• Completed—The previous graceful restart completed successfully
• Timed Out—The previous graceful restart timed out
• Topology Changed—The previous graceful restart terminated prematurely because of a
topology change
If you specify an IP address for the neighbor router, the following fields display.
Term Definition
Interface The interface of the local router in unit/slot/port format.
Area ID The area ID associated with the interface.
Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. These are
listed in its Hello packets. This enables received Hello Packets to be rejected (that is, neighbor
relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities.
Router Priority The router priority for the specified interface.
Dead Timer Due The amount of time, in seconds, to wait before the router assumes the neighbor is unreachable.
State The state of the neighboring routers.
Events Number of times this neighbor relationship has changed state, or an error has occurred.
Retransmission An integer representing the current length of the retransmission queue of the specified neighbor
Queue Length router Id of the specified interface.

show ipv6 ospf range

This command displays the set of OSPFv3 area ranges configured for a given area.
Format
show ipv6 ospf range area-id
Modes Privileged EXEC
M6100 Series Switches
IPv6 Commands
967