NETGEAR M6100 Series Reference Manual page 614

UDS 1
FLOGI 2
FDISC 5
LOGO 1
VNPort-keep-alive 310
MDA 35
UDA 3
FLOGI_ACC 4
FLOGI_RJT 0
FDISC_ACC 15
FDISC_RJT 0
LOGO_ACC 1
LOGO_RJT 0
CVL 0
--------------------------------
Number of Virtual Session Timeouts:2
Number of FCF Session Timeouts:
Number of Session configuration failures: 10
Number of Sessions denied with FCF limit:
Number of Sessions denied with ENode limit:
Number of Sessions denied with System limit:
show fip-snooping vlan
Use the show fip-snooping vlan command in User EXEC or Privileged EXEC mode to
display the FCoE VLANs information and, additionally, the FIP snooping port status when
optional argument is specified.
Note: This command can only be entered after FIP snooping is enabled
using the feature fip-snooping command. Otherwise, it does
not appear in the CLI syntax tree.
Format
show fip-snooping vlan [vlan-id]
Mode User EXEC
Privileged EXEC
Parameter Description
vlan-id A VLAN enabled for FIP snooping.
VLAN VLAN in which FIP snooping is enabled/operational.
FC-MAP FCoE mapped address prefix of the FCoE forwarder for the FCoE VLAN.
M6100 Series Switches
0
0
0
21
Data Center Commands
614