Show Ip Igmp Interface - NETGEAR M6100 Series Reference Manual

Term Definition
Up Time The time elapsed since the entry was created for the specified multicast group address on this
interface.
Expiry Time The amount of time remaining to remove this entry before it is aged out.
Version1 Host The time remaining until the local router assumes that there are no longer any IGMP version 1
Timer multicast members on the IP subnet attached to this interface. This could be an integer value or
"-----" if there is no Version 1 host present.
Version2 Host The time remaining until the local router assumes that there are no longer any IGMP version 2
Timer multicast members on the IP subnet attached to this interface. This could be an integer value or
"-----" if there is no Version 2 host present.
Group The group compatibility mode (v1, v2 or v3) for this group on the specified interface.
Compatibility Mode

show ip igmp interface

This command displays the IGMP information for the interface.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
Format
show ip igmp interface {unit/slot/port | vlan vlan-id}
Modes Privileged EXEC
User EXEC
Term Definition
Interface
unit/slot/port
IGMP Admin Mode The administrative status of IGMP.
Interface Mode Indicates whether IGMP is enabled or disabled on the interface.
IGMP Version The version of IGMP running on the interface. This value can be configured to create a router
capable of running either IGMP version 1 or 2.
Query Interval The frequency at which IGMP Host-Query packets are transmitted on this interface.
Query Max The maximum query response time advertised in IGMPv2 queries on this interface.
Response Time
Robustness The tuning for the expected packet loss on a subnet. If a subnet is expected to be have a lot of loss,
the Robustness variable may be increased for that interface.
Startup Query The interval between General Queries sent by a Querier on startup.
Interval
Startup Query The number of Queries sent out on startup, separated by the Startup Query Interval.
Count
M6100 Series Switches
IP Multicast Commands
1102