Port-Channel Local-Preference; Port-Channel Min-Links - NETGEAR M6100 Series Reference Manual

Term Definition
unit/slot/port Global Config Mode only: The interface is a logical unit/slot/port number of a configured
port-channel.
all Global Config Mode only: all applies the command to all currently configured port-channels.
no port-channel load-balance
This command reverts to the default load balancing configuration.
Format
no port-channel load-balance {unit/slot/port | all}
Mode Interface Config
Global Config
Term Definition
unit/slot/port Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-channel.
all Global Config Mode only: all applies the command to all currently configured port-channels.

port-channel local-preference

This command enables the local-preference mode on a port-channel (LAG) interface or
range of interfaces. By default, the local-preference mode for a port-channel is disabled. This
command can be used only on port-channel interfaces.
Default disable
Format
port-channel local-preference
Mode Interface Config
no port-channel local-preference
This command disables the local-preference mode on a port-channel.
Format
no port-channel local-preference
Mode Interface Config

port-channel min-links

This command configures the port-channel's minimum links for lag interfaces. The number
parameter can be in the range 1–8. The default is 1.
Default
1
Format
port-channel min-links number
Mode Interface Config
M6100 Series Switches
Switching Commands
457