Show Diffserv Policy Detailed - NETGEAR GSM7324 Reference Manual

DiffServ Admin mode
Class Table Size
Class Table Max
Class Rule Table Size
Class Rule Table Max
Policy Table Size
Policy Table Max
Policy Instance Table Size
Policy Instance Table Max
Policy Attribute Table Size
Policy Attribute Table Max
Service Table Size
Service Table Max

show diffserv policy detailed

This command displays all configuration information for the specified policy. The <policyname>
is the name of an existing DiffServ policy.
Format
Policy Name
Type
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Class Name
Mark CoS
CLI Commands: Differentiated Services
7000 Series L3 Managed Switch Reference Manual for Software v1.0
The current value of the DiffServ administrative mode.
The current number of entries (rows) in the Class Table.
The maximum allowed entries (rows) for the Class Table.
The current number of entries (rows) in the Class Rule Table.
The maximum allowed entries (rows) for the Class Rule Table.
The current number of entries (rows) in the Policy Table.
The maximum allowed entries (rows) for the Policy Table.
The current number of entries (rows) in the Policy Instance Table.
The maximum allowed entries (rows) for the Policy Instance
Table.
The current number of entries (rows) in the Policy Attribute
Table.
The maximum allowed entries (rows) for the Policy Attribute
Table.
The current number of entries (rows) in the Service Table.
The maximum allowed entries (rows) for the Service Table.
show diffserv policy detailed <policyname>
The name of this policy.
The policy type, namely whether it is an inbound or outbound
policy definition.
The name of this class.
Denotes the class of service value that is set in the 802.1p header
of outbound packets. This is not displayed if the config diffserv
policy mark cos command was not specified.
May 30, 2003 Beta Draft
9-31