Show Route-Map - NETGEAR M6100 Series Reference Manual

seq 10 deny ::/0
seq 15 deny ::/1
seq 20 deny ::/2
seq 25 deny ::/3 ge 4
seq 30 permit ::/0 le 128
Command example:
(NETGEAR Switch) #show ipv6 prefix-list summary apple
ipv6 prefix-list apple:
count: 6, range entries: 3, sequences: 5 - 30, refcount: 31
Command example:
(NETGEAR Switch) #show ipv6 prefix-list detail apple
ipv6 prefix-list apple:
count: 6, range entries: 3, sequences: 5 - 30, refcount: 31
seq 5 deny 5F00::/8 le 128 (hit count: 0, refcount: 1)
seq 10 deny ::/0 (hit count: 0, refcount: 1)
seq 15 deny ::/1 (hit count: 0, refcount: 1)
seq 20 deny ::/2 (hit count: 0, refcount: 1)
seq 25 deny ::/3 ge 4 (hit count: 0, refcount: 1)
seq 30 permit ::/0 le 128 (hit count: 240664, refcount: 0)

show route-map

To display a route map, use the show route-map command in Privileged EXEC mode.
Format
show route-map [map-name]
Mode Privileged EXEC
Parameter
map-name
Command example:
(NETGEAR Switch) # show route-map test
route-map test, permit, sequence 10
Match clauses:
ip address prefix-lists: orange
Set clauses:
set metric 50
M6100 Series Switches
Description
(Optional) Name of a specific route map.
Routing Commands
674