NETGEAR M6100 Series Reference Manual page 664

Command example:
(NETGEAR Routing) (config-route-map)# match mac-list MacList1
Example 2:
This example illustrates the scenario where MAC ACL referenced by a route-map is removed
or rules are added or deleted from that ACL, this is how configuration is rejected:
NETGEAR Routing) #show mac access-lists
Current number of all ACLs: 9
MAC ACL Name
-------------------------------
madan
mohan
goud
(NETGEAR Routing) #
(NETGEAR Routing) #
(NETGEAR Routing) #configure
(NETGEAR Routing) (Config)#route-map madan
(NETGEAR Routing) (route-map)#match mac-list madan mohan goud
(NETGEAR Routing) (route-map)#exit
(NETGEAR Routing) (Config)#exit
(NETGEAR Routing) #show route-map
route-map madan permit 10
Match clauses:
mac-list (access-lists) : madan mohan goud
Set clauses:
(NETGEAR Routing) (Config)#mac access-list extended madan
(NETGEAR Routing) (Config-mac-access-list)#permit 00:00:00:00:00:01 ff:ff:ff:ff:ff:ff
any
Request denied. Another application using this ACL restricts the number of rules allowed.
no match mac-list
To delete a match statement from a route map, use the no match mac-list command.
Format
no match mac-list [...mac-list-name]
Mode Route Map Configuration
M6100 Series Switches
Maximum number of all ACLs: 100
Rules Direction Interface(s)
----- --------- ----------------
1
1
1
Routing Commands
664
VLAN(s)
----------