NETGEAR M6100 Series Reference Manual page 284

Parameter
Receiver Index
Owner String
Time Out
Max Datagram Size
Port
IP Address
Address Type
Datagram Version
Command example:
(NETGEAR Switch) #show sflow receivers 1
Receiver Index................................. 1
Owner String................................... tulasi
Time out....................................... 0
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
Command example:
The following example shows that a receiver is configured as a non-time-out entry:
(NETGEAR Switch) #show sflow receivers
Rcvr Owner
Indx String
---- -------------------------------- ---------- --------- ----- ---------------
1 tulasi
string
2
3
4
5
6
7
8
M6100 Series Switches
Description
The sFlow Receiver associated with the sampler/poller.
The identity string for receiver, the entity making use of this sFlowRcvrTable entry.
The time (in seconds) remaining before the receiver is released and stops sending samples
to sFlow receiver. The no timeout value of this parameter means that the sFlow receiver is
configured as a non-timeout entry.
The maximum number of bytes that can be sent in a single sFlow datagram.
The destination Layer4 UDP port for sFlow datagrams.
The sFlow receiver IP address.
The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6
address, the value is 2.
The sFlow protocol version to be used while sending samples to sFlow receiver.
Timeout
No Timeout 1400
0
0
0
0
0
0
0
Utility Commands
284
Max Dgram Port IP Address
Size
6343 0.0.0.0 <= No Timeout
1400 6343 0.0.0.0
1400 6343 0.0.0.0
1400 6343 0.0.0.0
1400 6343 0.0.0.0
1400 6343 0.0.0.0
1400 6343 0.0.0.0
1400 6343 0.0.0.0