Neighbor Description; Neighbor Filter-List (Bgp Router Config) - NETGEAR M6100 Series Reference Manual

no neighbor default-originate (IPv6 Address Family Config)
Use this command to prevent BGP from originating a default IPv6 route to a specific
neighbor.
Format
no neighbor ip-address default-originate [route-map map-name]
Mode IPv6 Address Family Config

neighbor description

Use this command in BGP Router Config mode to record a text description of a neighbor.
The description is informational and has no functional impact.
Issue this command in Peer Template Configuration Mode to add it to a peer template.
Default No description is originated by default.
Format
neighbor ip-address description text
Mode BGP Router Config
Peer Template Config
Parameter Description
ip-address The neighbor's IP address.
text Text description of neighbor. Up to 80 characters are allowed.
no neighbor description
Use this command to delete the text description of a neighbor.
Format
no neighbor ip-address description
Mode BGP Router Config
Peer Template Config

neighbor filter-list (BGP Router Config)

This command filters advertisements to or from a specific neighbor according to the
advertisement's AS Path. Only a single AS path list can be configured in each direction for
each neighbor. If you invoke the command a second time for a given neighbor, the new AS
path list number replaces the previous AS path list number.
If you assign a neighbor filter list to a nonexistent AS path access list, all routes are filtered.
Default No neighbor filter lists are configured by default.
Format
neighbor ip-address filter-list as-path-list-number {in | out}
Mode BGP Router Config
M6100 Series Switches
Border Gateway Protocol Commands
823