Https Port; Snmp-Server Enable Traps Captive-Portal - NETGEAR M6100 Series Reference Manual

no http port
This command removes the specified additional HTTP port.
Format
no http port port-number
Mode Captive Portal Config

https port

This command configures an additional HTTPS secure port. The HTTPS secure port default
is 0 which denotes no additional port and the default port (443) is used. Port number 80 is
reserved.
Default 0
Format
https port port-number
Mode Captive Portal Config
Parameter Description
port-num Port number in the range of 0-65535.
Command example:
(NETGEAR Switch) (Config-CP) #https port 60000
(NETGEAR Switch) (Config-CP) #no https port
no https port
This command set the HTTPS secure port to the default.
Format
no https port port-number
Mode Captive Portal Config

snmp-server enable traps captive-portal

This command globally enables the captive portal traps. The specific captive portal traps are
configured using the trapflags command in Captive Portal Config Mode.
Default Disable
Format
snmp-server enable traps captive-portal
Mode Global Config
M6100 Series Switches
Captive Portal Commands
769