Show Rmon Events - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR Switch) #show rmon collection history interfaces 1/0/1
Index Interface
----------------------------------------------------------------------
1 1/0/1
2 1/0/1

show rmon events

This command displays the entries in the RMON event table.
Format
show rmon events
Mode Privileged Exec
Term Description
Event Index An index that uniquely identifies an entry in the event table. Each such entry defines one event that
is to be generated when the appropriate conditions occur. The range is 1 to 65535.
Event Description A comment describing the event entry. The default is alarmEvent.
Event Type The type of notification that the probe makes about the event. Possible values are None, Log, SNMP
Trap, Log and SNMP Trap. The default is None.
Event Owner Owner string associated with the entry. The default is monitorEvent.
Event Community The SNMP community specific by this octet string which is used to send an SNMP trap. The default
is public.
Owner Event owner. The owner string associated with the entry.
Last time sent The last time over which a log or a SNMP trap message is generated.
Command example:
(NETGEAR Switch) # show rmon events
Index Description
-------------------------------------------------------------------------------
1 test
M6100 Series Switches
Interval Requested
Samples
30 10
1800 50
Type Community
log public
Utility Commands
306
Granted Owner
Samples
10 myowner
10 monitorHistoryControl
Owner Last time sent
MIB 0 days 0 h:0 m:0 s