Show Ip Bgp Template - NETGEAR M6100 Series Reference Manual

Parameter Description
Up/Down Time Displays how long the adjacency has been in the ESTABLISHED state, or, if the adjacency is down,
how long it has been down. In days:hours:minutes:seconds
Pfx Rcvd The number of prefixes received from the neighbor
Command example:
(R1) # show ip bgp summary
IPv4 Routing.................................Enable
BGP Admin Mode...............................Enable
BGP Router ID............................172.20.1.1
Local AS Number..........................200
Traps....................................Disable
Maximum Paths............................32
Maximum Paths iBGP.......................16
Default Keep Alive Time..................30 sec
Default Hold Time........................90 sec
Number of Network Entries................20
Number of AS Paths.......................5
Default Metric................................. Not configured
Default Route Advertise........................ No
Redistributing.................................
Source......................................... ospf
Metric......................................... Not Configured
Match Value.................................... 'internal'
Distribute List................................ Not configured
Neighbor ASN
100.10.1.1 50
100.20.1.4 20

show ip bgp template

Use this command to view information about all configured BGP peer templates or for the
specified BGP template that you can specify with the name variable.
Format
show ip bgp template [name]
Mode Privileged Exec
M6100 Series Switches
MsgRcvd MsgSent
48 92
0 2 OPEN SENT
Border Gateway Protocol Commands
866
State Up/Down Time
EST 00:47:30
Pfx Rcvd
20
0